- Note
- Published:
Proportional limit of wood obtained from a load-time diagram during an impact bending test
Journal of Wood Science volume 48, pages 527–531 (2002)
Abstract
We transferred the linear part of a load-deflection diagram from an impact bending test of wood into a load-time diagram. In addition, we proposed a method to obtain the proportional limit from the load-time diagram. Japanese cedar (Cryptomeria japonica D. Don), hondo spruce (Picea yezoensis Carr. var.hondoensis Rehd.), hiba arbor-vitae (Thujopsis dolabrata Sieb. et Zucc.), Japanese red pine (Pinus densiflora Sieb. et Zucc.), paulownia (Paulownia tomentosa Steud.), Manchurian ash (Fraxinus mandshurica Rupr.), and Japanese evergreen oak (Quercus acuta Thunb.) were used in this study. The dimensions of each specimen were 115mm (L) * 7mm (R) * 7mm (T). The results were as follows: (1) The linear region of the load-deflection diagram in the impact bending test could be transferred with sufficient accuracy to a load-time diagram using a sine function. (2) Approximating the load-time diagram by a linear equation was useful for obtaining the proportional limit.
References
Liu Y, Nakayama Y, Kanagawa Y, Fujihara S (1999) Bending work of plantation grown Chinese fir (Cunninghamia lanceolata Hook.) (in Japanese). Mokuzai Gakkaishi 45:359–366
Kubojima Y, Okano T, Ohta M (2000) Bending strength and toughness of heat-treated wood. J Wood Sci 46:8–15
Kubojima Y, Ohsaki H, Sawada T, Origuchi K, Yoshihara H, Okano T (2000) Wood properties of sugi (Cryptomeria japonica D. Don) planted at Gobo-zawa in University Forest in Chiba (in Japanese). Bull Tokyo Univ For 103:243–306
Kollmann FFP, Côté WA Jr (1968) Principle of wood science and technology. Springer-Verlag, Berlin, pp 379–380
Ohta M, Asano I, Okano T (1979) Mechanical properties of brittleheart. II. Impact bending fracture (in Japanese). Mokuzai Gakkaishi 25:7–13
Government Forest Experiment Station (1958) Wood Industry Handbook (in Japanese). Maruzen, Tokyo, p 164
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kubojima, Y., Kato, H. & Tonosaki, M. Proportional limit of wood obtained from a load-time diagram during an impact bending test. J Wood Sci 48, 527–531 (2002). https://doi.org/10.1007/BF00766651
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00766651