Skip to main content
Journal of Wood Science

Official Journal of the Japan Wood Research Society

Download PDF

New technology for manufacturing high-strength cement-bonded particleboard using supercritical carbon dioxide

Journal of Wood Science volume 46, pages 85–88 (2000)Cite this article

References

  1. Simatupang MH, Seddig N, Habighorst C, Geimer RL (1991) Technology for rapid production of mineral-bonded wood composites boards. For Prod Res Soc 2:18–27

    Google Scholar 

  2. Nagadomi W, Kuroki Y, Kawai S, Sasaki H (1996) Rapid curing of cement-bonded particleboard with silica fume. II. Effect of autoclave curing on cement hydration. Mokuzai Gakkaishi 42:1202–1210

    CAS  Google Scholar 

  3. Nagadomi W, Kuroki Y, Eusebio DA, Linfei MA, Kawai S, Sasaki H (1996) Rapid curing of cement-bonded particleboard. V. Mechanism of strength development with fortifiers and accelerators during steam injection pressing. Mokuzai Gakkaishi 42:977–991

    CAS  Google Scholar 

  4. Linfei MA, Pulido OR, Yamauchi H, Kawai S, Sasaki H (1998) Manufacture of bamboo-cement composites. V. Effect of sodium silicate on bamboo-cement composite by hot pressing. Mokuzai Gakkaishi 44:425–432

    Google Scholar 

  5. Geimer RL, Souza MR, Moslemi AA, Simatupang MH (1993) Carbon dioxide application for rapid production of cement particleboard. For Prod Res Soc 3:31–41

    CAS  Google Scholar 

  6. Hachmi MH, Campbell AG (1989) Wood-cement chemical relationships. For Prod Res Soc 1:43–47

    Google Scholar 

  7. Lahtinen PK (1991) Experiences with cement-bonded particleboard manufacturing when using a short-cycle press line. For Prod Res Soc 2:32–34

    Google Scholar 

  8. Liong KK, Wells PA, Foster NR (1991) Diffusion on supercritical fluids. J Supercrit Fluids 4:91–108

    Article  CAS  Google Scholar 

  9. Hess RK, Erkey C, Akgerman A (1991) Supercriticai extraction of phenol from soil. J Supercrit Fluids 4:47–52

    Article  CAS  Google Scholar 

  10. Miller DA, Clark DS, Blanch HW, Prausnitz JM (1991) Fatty acid aggregation in supercritical carbon dioxide. J Supercrit Fluids 4:124–126

    Article  CAS  Google Scholar 

  11. Simatupang MH, Habighorst C (1993) The carbon dioxide process to enhance cement hydration in manufacturing of cement-bonded composites: comparison with common production method. For Prod Res Soc 3:114–120

    CAS  Google Scholar 

  12. Acda MN, Morrell JJ, Lovien KL (1997) Effect of SCF treatment on physical properties of wood-based composites. Wood Fiber Sci 29(2):121–130

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Wood Research Institute, Kyoto University, Uji, 611-0011, Kyoto, Japan

    Dede Hermawan, Toshimitsu Hata, Kenji Umemura & Shuichi Kawai

  2. Nichiha Co. Ltd., Nagoya, Japan

    Shin-ichi Kaneko & Yasuo Kuroki

Authors
  1. Dede Hermawan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Toshimitsu Hata
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Kenji Umemura
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Shuichi Kawai
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Shin-ichi Kaneko
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yasuo Kuroki
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Dede Hermawan.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Hermawan, D., Hata, T., Umemura, K. et al. New technology for manufacturing high-strength cement-bonded particleboard using supercritical carbon dioxide. J Wood Sci 46, 85–88 (2000). https://doi.org/10.1007/BF00779559

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00779559

Key words

  • Wood cement composites
  • Supercritical fluid
  • Curing of cement
  • Carbon dioxide