Manufacture and mechanical properties of binderless boards from kenaf core

Abstract

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10 min; pressing pressure 5.3 MPa; board thickness 5 mm; board density 1.0 g/cm³; average grain size 53 µm; and powder with no furfural content.