- ORIGINAL ARTICLE
- Published:
Method to estimate the internal stresses due to moisture in wood using transmission properties of microwaves
Journal of Wood Science volume 50, pages 15–21 (2004)
Abstract
The purpose of this paper is to offer a new method for detecting stress in wood due to moisture along the lines of a theory reported previously. According to the theory, the stress in wood could be estimated from the moisture content of the wood and the power voltage of a microwave moisture meter (i.e., attenuation of the projected microwave). This seems to suggest a possibility of utilizing microwaves in the field of stress detection. To develop such an idea, the stress formulas were initially modified to the form of an uni-variable function of power voltage, and the application method of the formulas to detection was tried. Finally, these results were applied to the data of sugi (Cryptomeria japonica) lumber in the previous experiment. The estimated strains showed fairly good agreement with those observed. It could be concluded from this study that the proposed method might be available for detecting stress in wood due to moisture.
Author information
Authors and Affiliations
Corresponding author
Additional information
Part of this report was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002
Rights and permissions
About this article
Cite this article
Takemura, T., Taniguchi, T. Method to estimate the internal stresses due to moisture in wood using transmission properties of microwaves. J Wood Sci 50, 15–21 (2004). https://doi.org/10.1007/s10086-003-0531-0
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10086-003-0531-0