TY - JOUR AU - Kawasaki, T. AU - Zhang, M. AU - Kawai, S. PY - 1998 DA - 1998// TI - Manufacture and properties of ultra-low density fiberboard JO - J Wood Sci VL - 44 UR - https://doi.org/10.1007/BF01130447 DO - 10.1007/BF01130447 ID - Kawasaki1998 ER - TY - BOOK PY - 2000 DA - 2000// TI - OSB performance by design — OSB in wood frame construction (Canadian edition) PB - Structural Board Association CY - Ontario ID - ref2 ER - TY - CHAP AU - Gibson, L. J. AU - Ashby, M. F. ED - Clarke, D. R. ED - Suresh, S. ED - Ward, F. R. S. I. M. PY - 1997 DA - 1997// TI - The design of sandwich panels with foam cores BT - Cellular solids PB - Cambridge University Press CY - Cambridge UR - https://doi.org/10.1017/CBO9781139878326.011 DO - 10.1017/CBO9781139878326.011 ID - Gibson1997 ER - TY - JOUR AU - Wang, Q. AU - Sasaki, H. AU - Yang, P. AU - Kawai, S. PY - 1992 DA - 1992// TI - Utilization of laminated-veneer-lumber from Sabah plantation thinnings as beam flanges. III. Production of composite beam and its properties JO - Mokuzai Gakkaishi VL - 38 ID - Wang1992 ER - TY - JOUR AU - Zhang, M. AU - Kawasaki, T. AU - Yang, P. AU - Honda, T. AU - Kawai, S. PY - 1996 DA - 1996// TI - Manufacture and properties of composite fiberboard III. Properties of three-layered bamboo-wood composite boards and stress analysis by the Finite Element Method JO - Mokuzai Gakkaishi VL - 42 ID - Zhang1996 ER - TY - JOUR AU - Kawasaki, T. AU - Zhang, M. AU - Kawai, S. PY - 1999 DA - 1999// TI - Sandwich panel of veneer-overlaid low-density fiberboard JO - J Wood Sci VL - 45 UR - https://doi.org/10.1007/BF00833493 DO - 10.1007/BF00833493 ID - Kawasaki1999 ER - TY - JOUR AU - Kawasaki, T. AU - Kwang, H. AU - Komatsu, K. AU - Kawai, S. PY - 2003 DA - 2003// TI - In-plane shear properties of the wood-based sandwich panels as a small shear wall, evaluated by the shear test method using tie-rods JO - J Wood Sci VL - 49 UR - https://doi.org/10.1007/s10086-002-0463-0 DO - 10.1007/s10086-002-0463-0 ID - Kawasaki2003 ER - TY - JOUR AU - Kawasaki, T. AU - Kawai, S. PY - 2006 DA - 2006// TI - Thermal insulation properties of wood-based sandwich panel for use as structural insulated walls ans floors JO - J Wood Sci VL - 52 UR - https://doi.org/10.1007/s10086-005-0720-0 DO - 10.1007/s10086-005-0720-0 ID - Kawasaki2006 ER - TY - BOOK AU - Allen, H. G. PY - 1969 DA - 1969// TI - Analysis and design of structural sandwich panels PB - Pergamon CY - Oxford ID - Allen1969 ER - TY - JOUR AU - Arima, T. AU - Okuma, M. PY - 1970 DA - 1970// TI - Studies on compound used injected and foamed polyurethane resin as core. I (in Japanese) JO - Mokuzai Kogyo VL - 25 ID - Arima1970 ER - TY - JOUR AU - Okuma, M. AU - Arima, T. PY - 1970 DA - 1970// TI - Studies on compound used injected and foamed polyurethane resin as core. II (in Japanese) JO - Mokuzai Kogyo VL - 25 ID - Okuma1970 ER - TY - BOOK AU - Vinson, J. R. PY - 1999 DA - 1999// TI - The behavior of sandwich structures of isotropic and composite materials PB - Technomic CY - Pennsylvania ID - Vinson1999 ER - TY - JOUR AU - Carlson, L. A. AU - Nordstrand, T. AU - Westerlind, B. PY - 2001 DA - 2001// TI - On the elastic stiffness of corrugated core sandwich JO - J Sandw Struct Mater VL - 3 UR - https://doi.org/10.1106/BKJF-N2TF-AQ97-H72R DO - 10.1106/BKJF-N2TF-AQ97-H72R ID - Carlson2001 ER - TY - JOUR AU - Whitney, J. M. PY - 2001 DA - 2001// TI - A local model for bending of weak core sandwich plates JO - J Sandw Struct Mater VL - 3 UR - https://doi.org/10.1106/V8W8-U8XR-MFV5-XTKK DO - 10.1106/V8W8-U8XR-MFV5-XTKK ID - Whitney2001 ER - TY - JOUR AU - Swanson, S. R. AU - Kim, J. PY - 2002 DA - 2002// TI - Optimization of sandwich beams for concentrated loads JO - J Sandw Struct Mater VL - 4 UR - https://doi.org/10.1177/1099636202004003139 DO - 10.1177/1099636202004003139 ID - Swanson2002 ER - TY - JOUR AU - Gupta, N. AU - Woldesenbet, E. AU - Kishore, K. AU - Sankaran, S. PY - 2002 DA - 2002// TI - Response of syntactic foam core sandwich structured composites to three-point bending JO - J Sandw Struct Mater VL - 4 UR - https://doi.org/10.1177/1099636202004003140 DO - 10.1177/1099636202004003140 ID - Gupta2002 ER - TY - BOOK PY - 2000 DA - 2000// TI - JAS for structural plywood PB - Ministry of Agriculture, Forestry and Fisheries CY - Tokyo ID - ref17 ER - TY - STD TI - Sasaki H (1991) Development of continuous press with steam-injection heating from both sides. Report for the Grant-in-Aid for Scientific Research (No. 01860023) from the Ministry of Education, Science and Culture of Japan ID - ref18 ER - TY - BOOK PY - 1994 DA - 1994// TI - JIS A 1414 Methods of performance test of panels for building construction PB - Japanese Standard Association CY - Tokyo ID - ref19 ER - TY - BOOK PY - 2003 DA - 2003// TI - JIS A 5905 Fiberboards PB - Japanese Standard Association CY - Tokyo ID - ref20 ER - TY - BOOK PY - 2003 DA - 2003// TI - JIS A 5908 Particleboards PB - Japanese Standard Association CY - Tokyo ID - ref21 ER - TY - BOOK PY - 2003 DA - 2003// TI - JAS for structural panel. Ministry of Agriculture PB - Forestry, and Fisheries CY - Tokyo ID - ref22 ER - TY - JOUR AU - Triantafillou, T. C. AU - Gibson, L. J. PY - 1987 DA - 1987// TI - Failure mode maps for foam core sandwich beams JO - Mat Sci Eng VL - 95 UR - https://doi.org/10.1016/0025-5416(87)90496-4 DO - 10.1016/0025-5416(87)90496-4 ID - Triantafillou1987 ER - TY - JOUR AU - Triantafillou, T. C. AU - Gibson, L. J. PY - 1987 DA - 1987// TI - Minimum weight design of foam core sandwich panels for a given strength JO - Mat Sci Eng VL - 95 UR - https://doi.org/10.1016/0025-5416(87)90497-6 DO - 10.1016/0025-5416(87)90497-6 ID - Triantafillou1987 ER -