- Original Article
- Published:
New monitoring concept of moisture content distribution in wood during RF/vacuum drying
Journal of Wood Science volume 53, pages 1–4 (2007)
Abstract
A new method for monitoring moisture content during radio-frequency (RF)/vacuum drying was developed by measurement of temperature and pressure in wood. Temperature and pressure inside the wood were measured simultaneously during RF/vacuum drying at the same point. The relative humidity (RH) and moisture content (MC) below the fiber saturation point (FSP) were calculated based on temperature and pressure, and the relationship between the temperature, RH, and equilibrium moisture content (EMC) at the measurement point. When the moisture content was below the FSP, the calculated MC was slightly greater than the value given by oven drying. The absolute error was within 0.8% near the open cross side, and was within 1.8% at another measurement point. Thus, we concluded that it was practicable to monitor the moisture content below the FSP according to the temperature and pressure inside the wood.
References
Koumoutsakos A, Avramidis S, Hatzikiriakos SG (2001) Radio frequency vacuum drying of wood. II. Experimental model evaluation. Dry Technol 19:85–98
Cai YC, Hayashi K (2001) Pressure and temperature distribution in wood during radio-frequency/vacuum drying. Proceedings of the 7th International IUFRO Wood Drying Conference, Tsukuba, Japan, pp 386-391
Kollmann FFP, Cote WA Jr, Wilfred ACJ (1968) Principles of wood science and technology I. Solid wood. Springer, Berlin Heidelberg New York
Author information
Authors and Affiliations
Corresponding author
Additional information
Part of this study was presented at the 15th Annual Meeting of the Chugoku Shikoku Branch of the Japan Wood Research Society, Higashi-Hiroshima, Japan, September 2003
Rights and permissions
About this article
Cite this article
Cai, Y., Hayashi, K. New monitoring concept of moisture content distribution in wood during RF/vacuum drying. J Wood Sci 53, 1–4 (2007). https://doi.org/10.1007/s10086-006-0813-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10086-006-0813-4