Skip to main content

Official Journal of the Japan Wood Research Society

  • Original Article
  • Published:

Collapsing process simulations of timber structures under dynamic loading III: numerical simulations of real-size wooden houses

Abstract

In this study, we developed a new analysis method that enables numerical simulations of the collapse process of real-size wooden houses and evaluated the accuracy thereof by carrying out numerical simulations by shaking table tests. The distinct element method was adopted as the basic theory of our numerical analysis. This research is the first approach in which the extended distinct element method was used for Japanese timber post-and-beam construction. The size of the analysis model is a 5.5 m × 5.5 m, two-story real-size wooden house. The three analytical models were developed in terms of the strength of exterior mortar walls. The simulation results were compared with the shaking table test results. One of the collapsing processes of the numerical simulation corresponds well to the experiment results. Assessment of the possibility of collapse for real-size wooden houses was determined to be possible using our newly developed numerical analysis method.

References

  1. Japan Housing and Wood Technology Center (2007) Design guideline of limit seismic resistance calculation for wooden post and beam construction houses (in Japanese). Japan Housing and Wood Technology Center, Tokyo

    Google Scholar 

  2. Tsuchimoto T, Sugimoto K, Aoki K, Isoda H, Nakagawa T, Fukumoto Y (2008) Study on shear strength and limit deformation to collapse of old wood houses (in Japanese). In: Summaries of Technical Papers of Annual Meeting of the Architectural Institute of Japan C-1:103–104

  3. Yoshioka K, Tuda C, Akiyama T, Miyazawa K (2007) Statically destructive loading test of existing wooden house. Part 6. 52 years old one-storey house in Sizuoka: results of loading test (in Japanese). In: Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan C-1:467–468

  4. Miyake T, Minowa C, Isoda H, Koshihara M, Tsuchimoto T, Sakamoto I (2008) Collapsing response analyses of existing wood houses corresponding to shaking table test. In: Proceedings, World Conference on Timber Engineering, 2008, p 286

  5. Nakagawa T, Ohta M (2003) Collapsing process simulations of timber structures under dynamic loading. I: Simulations of two-story frame models. J Wood Sci 49:392–397

    Article  Google Scholar 

  6. Nakagawa T, Ohta M (2003) Collapsing process simulations of timber structures under dynamic loading. II: Simplification and qualification of the calculating method. J Wood Sci 49:499–504

    Article  Google Scholar 

  7. Japan Housing and Wood Technology Center (1996) Report of works on development of technology for joint design of timber post and beam construction houses: WG of test on column bottom joints (in Japanese). Japan Housing and Wood Technology Center, Tokyo

    Google Scholar 

  8. Miyamura M, Ohta M, Sato M (2006) Shear strength and fracture mechanism of lath-mortar wall. I. Analysis of shearing deformation of mortar wall with lath board (in Japanese). Mokuzai Gakkaishi 52:303–311

    Article  CAS  Google Scholar 

  9. Nakagawa N, Kawai N, Tsuchimoto T, Okabe M (2006) Verification for seismic performance of existing wood houses by shaking table tests. Part 15: Structural performance of wooden frame walls in the building by shaking table tests (in Japanese). In: Summaries of Technical Papers of Annual Meeting of the Architectural Institute of Japan C-1:395–396

  10. Nakamura I, Shimizu H, Minowa C, Sakamoto I, Suzuki Y (2006) Full scale shaking table tests for post and beam wooden houses by E-Defence. In: Proceedings of First European Conference on Earthquake Engineering and Seismology, no.733

  11. The Japan Building Disaster Prevention Association (2004) Seismic performance evaluation and strengthening method for timber houses (in Japanese). Japan Building Disaster Prevention Association, Tokyo

    Google Scholar 

  12. National Research Institute for Earth Science and Disaster Prevention (2006) A special project for earthquake disaster mitigation in urban areas. II: Working papers (in Japanese). National Research Institute for Earth Science and Disaster Prevention, pp 99–116

  13. The Building Center of Japan (1991) Technical guideline for input ground motion for structural design (in Japanese). Building Center of Japan, Tokyo

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Takafumi Nakagawa.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Nakagawa, T., Ohta, M., Tsuchimoto, T. et al. Collapsing process simulations of timber structures under dynamic loading III: numerical simulations of real-size wooden houses. J Wood Sci 56, 284–292 (2010). https://doi.org/10.1007/s10086-009-1101-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10086-009-1101-x

Key words