Performance of particleboard manufactured using air-injection press II: effects of board density and thickness on the performance of board manufactured from low-moisture particles

Journal of Wood Science

Official Journal of the Japan Wood Research Society

Table 1 Abbreviations for boards and conditions of board manufacture

Abbreviations	Metal frame Yes/No	Pressing method	Pressing temperature (°C)	Pressing time (min)	Board density (g/cm³)	Board thickness (mm)	Air-injection pressure (MPa)
AIP board	Yes	Air-injection press	150, 170	6	0.6, 0.7, 0.8	10	0.55
OP board	No	Ordinary press	150, 170	6	0.6, 0.7, 0.8	10	0
150 °C board	Yes	Air-injection press	150	6	0.6, 0.7, 0.8	10	0.20, 0.40, 0.55
170 °C board	Yes	Air-injection press	170	6	0.6, 0.7, 0.8	10	0.20, 0.40, 0.55
10-mm board	Yes	Air-injection press	170	4, 6, 8	0.7	10	0.55
20-mm board	Yes	Air-injection press	170	10, 12, 14	0.7	20	0.55
20-mm-control board	No	Ordinary press	170	10	0.7	20	0