Official Journal of the Japan Wood Research Society
From: Properties of particleboard manufactured using an air-injection radio-frequency hot press
Abbreviations | Density (g/cm3) | Pressing method | Board manufactured | Variable condenser after radio-frequency heating (%) | Heating time of radio frequency | Moisture after pressing |
---|---|---|---|---|---|---|
H board | 0.6 | H | Failure | – | – | – |
H board | 0.7 | H | Failure | – | – | – |
H board | 0.8 | H | Failure | – | – | – |
RH board | 0.6 | RH | Success | 95 | 9 min 55 s | B |
RH board | 0.7 | RH | Success | 94 | 9 min 55 s | B |
RH board | 0.8 | RH | Success | 95 | 9 min 55 s | B |
ARH board | 0.6 | ARH | Success | 100 | 4 min 30 s | A |
ARH board | 0.7 | ARH | Success | 100 | 6 min 30 s | A |
ARH board | 0.8 | ARH | Success | 100 | 9 min 20 s | A |