Official Journal of the Japan Wood Research Society
Table 2 Compressive strength of cylindrical samples compared with the maximum load applied on the base of an interior wall made of the corresponding experimental material
No. | Cylindrical samples | Interior wall 300 × 100 × 10 cm3 (height, length, width) = 300,000 cm3 volume | |||
|---|---|---|---|---|---|
Material | Mean density, (g/cm3) | Compressive strength, (N/mm2) | Weight of wall, (kg) | Load applied by the wall itself on the base of wall, (N/mm2) | |
1 | Gypsum–office paper | 1.30 | 5.84 | 390 | 0.038 |
2 | Gypsum–newspaper | 1.26 | 4.78 | 378 | 0.037 |
3 | Gypsum–magazine paper | 1.28 | 4.48 | 384 | 0.038 |
4 | Gypsum–corrugated board paper | 1.30 | 5.93 | 390 | 0.038 |
5 | Gypsum–corrugated paperboard | 1.30 | 6.35 | 390 | 0.038 |
6 | Gypsum–Tetra Pak I | 1.29 | 6.46 | 387 | 0.038 |
7 | Gypsum–Tetra Pak II | 1.34 | 6.18 | 402 | 0.039 |