Official Journal of the Japan Wood Research Society
Table 2 The percentage of produced WF for mesh pass 90–180 μm
From: The effect of wood particle size distribution on the mechanical properties of wood–plastic composite
Drying conditions | Wet milling time (min) | ||||||
|---|---|---|---|---|---|---|---|
0 | 10 | 20 | 30 | 40 | 60 | 120 | |
Heat drying | 15.1 | 21.2 | 29.1 | 33.6 | 25.5 | 22.0 | 9.2 |
Freeze-drying | 16.8 | 24.7 | 33.8 | 42.0 | 38.9 | 24.8 | 34.9 |