Skip to main content
Journal of Wood Science

Official Journal of the Japan Wood Research Society

Fig. 6 | Journal of Wood Science

Fig. 6

From: Thermal properties of wood measured by the hot-disk method: comparison with thermal properties measured by the steady-state method

Fig. 6

Relationship between thermal conductivity and density. Note: λL, λR, and λT are the thermal conductivities in the longitudinal, radial, and tangential directions measured by the steady-state method, respectively. λhRT, λhLR, and λhLT are the thermal conductivities measured by the hot-disk method when the sensor was in contact with the cross section (RT plane), radial section (LR plane), and tangential section (LT plane), respectively

Back to article page