Fig. 7From: Thermal properties of wood measured by the hot-disk method: comparison with thermal properties measured by the steady-state methodRelationship between thermal diffusivity and density. Note: αL, αR, and αT are the thermal diffusivities in the longitudinal, radial, and tangential directions calculated from λL, λR, and λT, respectively. αhRT, αhLR, and αhLT are the thermal conductivities measured by the hot-disk method when the sensor was in contact with the cross section (RT plane), radial section (LR plane), and tangential section (LT plane), respectivelyBack to article page