Official Journal of the Japan Wood Research Society
Table 1 Milling parameters at three cutting speeds
Cutting width, mm | Cutting depth, mm | Spindle speed, rpm | Cutting speed, m/s | Feed rate, m/min | Total time of milling, min | Total volume of removed MDF, m3 |
|---|---|---|---|---|---|---|
3 | 1 | 8000 | 3.351 | 3.394 | 105 | 9 × 10–4 |
12,000 | 5.027 | 5.091 | 75 | |||
16,000 | 6.702 | 6.788 | 61 |