Skip to main content

Official Journal of the Japan Wood Research Society

Journal of Wood Science Cover Image

Articles

Page 7 of 42

  1. The article Effect of decay on shear performance of dowel-type timber joints, written by Kei Sawata, Takanobu Sasaki, Shuichi Doi and Yasuo Iijima

    Authors: Kei Sawata, Takanobu Sasaki, Shuichi Doi and Yasuo Iijima
    Citation: Journal of Wood Science 2018 64:1779

    The original article was published in Journal of Wood Science 2008 54:s10086-008-0963-7

  2. The article Quantification of visual inducement of knots by eye-tracking, written by Masashi Nakamura and Takayuki Kondo, was originally published electronically on the publisher’s internet portal (currently S...

    Authors: Masashi Nakamura and Takayuki Kondo
    Citation: Journal of Wood Science 2018 64:1777

    The original article was published in Journal of Wood Science 2008 54:s10086-007-0910-z

  3. We investigated the temporal changes in creep and stress relaxation behavior in both microscopic crystalline cellulose and macroscopic strain of wood specimen using Japanese cypress (Chamaecyparis obtusa Endl.) t...

    Authors: Takahisa Nakai, Keisuke Toba and Hiroyuki Yamamoto
    Citation: Journal of Wood Science 2018 64:1767
  4. Five different wooden parallel chord trusses were made of Canadian spruce 2 by 4 lumbers. Chord–web nodal points were composed of self-tapping-screws (STS) whose numbers per nodal point and allocations in noda...

    Authors: Kohei Komatsu, Qicheng Teng, Zherui Li, Xiaolan Zhang, Weizhen Cai and Zeli Que
    Citation: Journal of Wood Science 2018 64:1774
  5. Volatile organic compounds (VOCs) released from Chamaecyparis formosensis, Cryptomeria japonica, Cunninghamia lanceolata, Chamaecyparis obtusa var. formosana, and Taiwania cryptomerioides five major building and ...

    Authors: Min-Jay Chung, Sen-Sung Cheng, Chun-Ya Lin and Shang-Tzen Chang
    Citation: Journal of Wood Science 2018 64:1773
  6. This study investigated the anatomical and chemical characteristics of the reaction wood of a gymnpsperm species, Gnetum gnemon, and discussed on contributing factor for the type of reaction wood in this species....

    Authors: Haruna Aiso-Sanada, Futoshi Ishiguri, Denny Irawati, Imam Wahyudi and Shinso Yokota
    Citation: Journal of Wood Science 2018 64:1772
  7. Ammonia pretreatment is a promising technique for enhancing enzymatic saccharification of lignocellulosic biomass. However, an enzymatic cocktail suitable for the breakdown of pretreated biomass samples is sti...

    Authors: Kiyoshi Sakuragi, Chiaki Hori, Kiyohiko Igarashi and Masahiro Samejima
    Citation: Journal of Wood Science 2018 64:1770
  8. Ultrasonic-assisted dyeing as a novel and eco-friendly method was utilized to improve decorative value of fast-growing tree species. The effects of ultrasonic-assisted dyeing parameters (e.g., temperature, dye...

    Authors: Xiaoqian Wang, Zhiming Yu, Yang Zhang, Chusheng Qi and Wen-lung Chang
    Citation: Journal of Wood Science 2018 64:1768
  9. Vanillin is one of the industrially important compounds that can be produced from lignin. This study presents production of vanillin and vanillic acid (oxidized form of vanillin) through aerobic oxidation of J...

    Authors: Misaki Maeda, Takashi Hosoya, Koichi Yoshioka, Hisashi Miyafuji, Hiroyuki Ohno and Tatsuhiko Yamada
    Citation: Journal of Wood Science 2018 64:1766
  10. Several ionic liquids promote depolymerization of wood components, i.e., polysaccharides and lignin, into low molecular weight compounds, some of which further re-polymerize into resin-like compounds. In this ...

    Authors: Nagisa Nakaya, Takashi Hosoya and Hisashi Miyafuji
    Citation: Journal of Wood Science 2018 64:1769
  11. The method of digital image correlation (DIC) was applied to the digital image of orthogonal cutting parallel to the grain of hinoki, and the strain distribution near the cutting edge was evaluated. The wood f...

    Authors: Masumi Minagawa, Yosuke Matsuda, Yuko Fujiwara and Yoshihisa Fujii
    Citation: Journal of Wood Science 2018 64:1760
  12. Hot-press drying has gained attention due to its excellent drying rate and surface strengthening effect. The moisture state in poplar lumber (Populus tomentosa) with moisture content (MC) above fibre saturation p...

    Authors: Junfeng Hou, Songlin Yi, Yongdong Zhou and Bin Pan
    Citation: Journal of Wood Science 2018 64:1759
  13. Sandwich compression of wood that can control the density and position of compressed layer(s) in the compressed wood provides a promising pathway for full valorization of low-density plantation wood. This stud...

    Authors: Ren Li, Zhiqiang Gao, Shanghuan Feng, Jianmin Chang, Yanmei Wu and Rongfeng Huang
    Citation: Journal of Wood Science 2018 64:1758
  14. This study shows a method to easily develop suitable impregnation procedure of chemicals for preserving the archaeological waterlogged wood (WW) using diffusion constant. The steady-state diffusion coefficient...

    Authors: Nguyen Duc Thanh, Soichiro Wakiya, Kazutaka Matsuda, Bui Duy Ngoc, Junji Sugiyama and Yohsei Kohdzuma
    Citation: Journal of Wood Science 2018 64:1754
  15. The behaviors of cellulose (commercially available filter paper) were investigated in glow-discharge plasma, where pyrolysis does not occur because of low temperatures. Cellulose filter papers were decomposed ...

    Authors: Eiji Minami, Syunpei Fujimoto and Shiro Saka
    Citation: Journal of Wood Science 2018 64:1755
  16. To elucidate the decomposition behaviors of lignin from different taxonomic groups, five different lignocellulosics were treated with hot-compressed water (230 °C/10 MPa/15 min) to fractionate lignins into wat...

    Authors: Masatsugu Takada, Harifara Rabemanolontsoa, Eiji Minami and Shiro Saka
    Citation: Journal of Wood Science 2018 64:1752
  17. Since the structure of oil palm wood varies dramatically, the property gradients of oil palm wood within a trunk are of great interest. In this study, the physical (density, water uptake and swelling in the ra...

    Authors: Suthon Srivaro, Nirundorn Matan and Frank Lam
    Citation: Journal of Wood Science 2018 64:1750
  18. Transmittance and reflectance of visible light by sugi wood (Cryptomeria japonica) were investigated in the longitudinal (L) and tangential (T) directions. Transmittance was the highest in the L direction and ref...

    Authors: Hiroyuki Sugimoto, Sakiko Kawabuchi, Masatoshi Sugimori and Joseph Gril
    Citation: Journal of Wood Science 2018 64:1751
  19. Glycol lignin possessing thermoplastic and fusible properties can be a biorefinery platform material; however, glycol lignin is obtained as very small particles in suspension and the low dewatering efficiency ...

    Authors: Yasuyuki Matsushita, Hiroki Endo, Shiho Takahashi, Dan Aoki, Kazuhiko Fukushima and Tatsuhiko Yamada
    Citation: Journal of Wood Science 2018 64:1749
  20. Raffia palm fibers are potential reinforcement materials for making cost-effective polymer-based composite. This paper presents the results obtained from a study of physical, chemical, thermal and mechanical p...

    Authors: Opeoluwa Fadele, Ikechukwuka N. A. Oguocha, Akindele Odeshi, Majid Soleimani and Chithra Karunakaran
    Citation: Journal of Wood Science 2018 64:1748
  21. The pyrogenic conversion of lignin to a phenolic tar can be significantly enhanced by combining dry distillation with simultaneous electron-beam treatment of lignin. The tar produced by the combined method con...

    Authors: Igor N. Gorbarev, Alexander I. Kasterin, Polina K. Metreveli and Alexander V. Ponomarev
    Citation: Journal of Wood Science 2018 64:1746
  22. A new approach was developed to predict the compressive resistance of cross-laminated timber (CLT) using the compressive strength of small samples of different grade lamina from E12 and E8 larch, and E10 and E...

    Authors: Sung-Jun Pang and Gi Young Jeong
    Citation: Journal of Wood Science 2018 64:1741
  23. Two common wood flooring materials, taun (Pometia spp.) and cumaru (Dipteryx odorata), were used as investigated objects and comparison was made between the two wood species for their density, microstructure, mic...

    Authors: Yurong Wang, Minglei Su, Haiyan Sun and Haiqing Ren
    Citation: Journal of Wood Science 2018 64:1743
  24. We investigated the potential of white-rot fungi for bioremediation of aqueous environments contaminated with diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea). First, diuron degradation activities of several w...

    Authors: Toshio Mori, Shiho Sudo, Hirokazu Kawagishi and Hirofumi Hirai
    Citation: Journal of Wood Science 2018 64:1740
  25. The reaction products of an alkaline treatment of non-phenolic β-O-4-type lignin model compounds (C6–C2-type) consisting of p-hydroxyphenyl (H), guaiacyl (G), and/or syringyl (S) nuclei were identified and quanti...

    Authors: Satoko Shimizu, Pattaraporn Posoknistakul, Takuya Akiyama, Tomoya Yokoyama and Yuji Matsumoto
    Citation: Journal of Wood Science 2018 64:1739
  26. Bamboo-derived activated carbon prepared by superheated steam (BAC) exhibited performance for utilization as an electric double layer capacitor (EDLC) electrode. Pore structure and EDLC performances were inves...

    Authors: Keisuke Kikuchi, Rie Yamashita, Satoshi Sakuragawa, Keigo Hasumi, Yasuhiro Mukai, Hiroya Kobayakawa, Shojiro Wakabayashi and Yukie Saito
    Citation: Journal of Wood Science 2018 64:1736
  27. Loading tests were conducted on nailed connections with decay due to a brown rot fungus. The effect of the decay on the lateral strength of nailed connections was investigated. After loading tests, the sound a...

    Authors: Kei Sawata and Yoshihisa Sasaki
    Citation: Journal of Wood Science 2018 64:1734
  28. To improve the impregnation of wood, the pre-treatment by compression was systematically studied in terms of effects of compression ratio, compression direction, compression speed and compression-unloading pla...

    Authors: Youke Zhao, Zhihui Wang, Ikuho Iida and Juan Guo
    Citation: Journal of Wood Science 2018 64:1735
  29. The transport of monolignols from the cytosol to the cell wall is essential for lignin synthesis. The ATP-binding cassette (ABC) transporters may be involved in the transport of lignin precursors. ABC transpor...

    Authors: Manami Takeuchi, Atsushi Watanabe, Miho Tamura and Yuji Tsutsumi
    Citation: Journal of Wood Science 2018 64:1733
  30. Epidermal peeling treatment (EPT) and steam-heating treatment (SHT) are two popular pretreatments for bamboo processing. This study examined the effects of EPT and SHT on strength properties, profile density d...

    Authors: Min Jay Chung and Sheng Yang Wang
    Citation: Journal of Wood Science 2018 64:1731
  31. The scrimber is composed of the special elementary unit called fibrosis veneers. Study on chemical constituent changes of fibrosis veneers during heat treatment is helpful to expand the application areas of sc...

    Authors: Yanan Wei, Yuxiang Huang, Yanglun Yu, Ruiqing Gao and Wenji Yu
    Citation: Journal of Wood Science 2018 64:1732
  32. Until now we developed an estimation method for strength distributions of laminated veneer lumber (LVL) element by nonlinear least-squares method (NLM). Estimated strengths by this method were modulus of elast...

    Authors: Makoto Koseki, Noboru Nakamura and Shinichiro Naoi
    Citation: Journal of Wood Science 2018 64:1729
  33. This study is focused on what factor mainly affects the mechanical properties of each wood species in the lateral direction. At first, the influence of the density which is closely related to mechanical proper...

    Authors: Yuka Miyoshi, Keisuke Kojiro and Yuzo Furuta
    Citation: Journal of Wood Science 2018 64:1730
  34. A digital image correlation (DIC) method was utilized to measure strain distributed within approximately 0.5 mm of the cutting edge during slow-speed orthogonal cutting of air-dried hinoki (Chamaecyparis obtusa),...

    Authors: Yosuke Matsuda, Yuko Fujiwara and Yoshihisa Fujii
    Citation: Journal of Wood Science 2018 64:1724
  35. The paper focuses on timber structures. Static analysis was performed in the paper of timber lattice columns with N and V lattice configuration made in variants of timber, plywood, fibreboard and particleboard...

    Authors: Krzysztof Śliwka
    Citation: Journal of Wood Science 2018 64:1715
  36. The article, Extractives of Quercus crispula sapwood infected by the pathogenic fungi Raffaelea quercivora I: comparison of sapwood extractives from noninfected and infected samples, written by Kayoko Imai, Tohru...

    Authors: Kayoko Imai, Tohru Mitsunaga, Hiroyuki Takemoto, Toshihiro Yamada, Shin-ichiro Ito and Hideo Ohashi
    Citation: Journal of Wood Science 2018 64:1722

    The original article was published in Journal of Wood Science 2009 55:s10086-008-1005-1

  37. The aim of this study is to examine the wettability and thermal properties of individual bamboo fibers after alkali treatment. The individual bamboo fibers were treated by sodium hydroxide (NaOH) solution with...

    Authors: Hong Chen, Wenfu Zhang, Xuehua Wang, Hankun Wang, Yan Wu, Tuhua Zhong and Benhua Fei
    Citation: Journal of Wood Science 2018 64:1713

Annual Journal Metrics

Associated Society

JWRS logo

Journal of Wood Science is affiliated with The Japan Wood Research Society.

Submit your manuscript in Editorial Manager